Repairing Garden Hose Leaks

By CoolGardenThings

Repairing Garden Hose Leaks by Robert Thomson

Thousands of people each year throw away their garden hoses because the have a leak or sometimes the ends of the hose become over or oblong in shape causing the hose attachments not to work properly and leak.

What many people do not know is that there are simple ways to repair your garden house for only a few dollars.

If you have a bad end of the garden hose you can buy a replacement end that is easily installed by just cutting the hose and attached the new end on the hose, and then you will tighten the clamp that is provided. You will then have a repaired end to your hose.

If there is a rip, tear, or hole in any section of he garden hose you can by something called a hose mender that will basically connect two end of the hose together.

To install the hose mender cut the garden hose 2 inches from each side of the puncture and then slide the hose mender on two both sides of the hose and tighten down the clamp and your all set.

By simply spending a few dollars and spending a few minutes of your time you can save a lot of money doing home repairs yourself

Jack Dalton is a writer for ToolsKeep.com, where you can find information about Kent Moore Tools, Chicago Electric Power Tools, and Grizzly Tools.

Article Source: http://articlecrux.com

Originally posted 2009-03-01 09:46:50. Republished by Blog Post Promoter

-- Weather When Posted --

  • Temperature: 51°F;
  • Humidity: 40%;
  • Heat Index: 51°F;
  • Wind Chill: 48°F;
  • Pressure: 30.24 in.;

Enjoy This Article? Please leave a comment ;)

Categories : Things & Stuff


  1. Zara says:

    Not to mention you will be saving the landfills a lot of valuable space…

Leave a Reply

CommentLuv Enabled